Skip to content
Priced kitWine & hillside cellar

Precast hillside & wine cellar

FMV-1608-H08-D-CL

16 ft long · 8 ft wide · 8 ft clear height · door on end · concrete lid

Dug into a slope with the door centred on the open end, so you walk straight in with no stair. 16 × 8 ft outside and 8 ft clear inside, with an insulated door and passive airflow.

Configure this kit

Tell us about your project — another size, a question, or a site to check.

DOOR ON END · 4 FT OPENING, NO STAIR16'-0"8'-0"PLAN · 16 × 8 FT · 128 SQ FT8'-0" CLEAR · PRECAST FLOOR SECTIONS4 PANELS PER SIDE · 2 PER END
Plan · FMV-1608-H08-D-CL

Built for

  • Wine storage
  • Root and cold storage on a sloping site
  • Anyone who would rather not carry things up and down a stair
Outside size
16 × 8 ft
Clear height
8 ft
Wall section
9 in reinforced
Design
PE stamped design · sheets published

Every part in the kit

Every line comes off the Freestone price list, with the quantities Freestone has set for this kit.

Hillside cellarFMV-1608-H08-D-CL
  • Wall panel, 4 × 8 ft4 × $1,298
    $5,192
  • Precast lid, 4 × 8 ft4 × $1,380
    $5,520
  • Floor section, 43½" × 78" × 3"4 × $786
    $3,144
  • Stair landing, 3 × 3 ft1 × $296
    $296
  • Corner panel, 4 × 8 ft6 × $1,352
    $8,112
  • Door lintel1 × $166
    $166
  • Insulated fiberglass door1 × $520
    $520
  • Half panel, 2 ft2 × $649
    $1,298
  • Airflow pipework1 × $416
    $416
Kit price$24,664
  • * Transportation to your site is an additional cost, quoted separately.
  • * Kits are supplied for assembly on your prepared site. We can install if needed — ask us for a quote.

Options

  • Exposed aggregate finishFinish for above-ground utility buildings.On request
  • InstallationKits are supplied for assembly on your prepared site. We can install if needed — ask us for a quote.On request

How it goes in

  • No poured footer below grade

    A buried vault sits on a bed of crushed, compacted stone — no footing to form, pour or wait on. A building set above ground requires a poured footing, so frost can't shift it.

  • Sealed and watertight

    Every panel seam is sealed with polyurethane and through-bolted. The structure is watertight once the last seam closes.

  • Grouted, then backfilled

    On a buried kit, the precast floor sections sit inside the walls with a small gap all round. The gaps are grouted solid before any backfill goes in.

If your building department needs stamped plans, our engineer seals your layout once you have signed off on the drawing, with the structural calculations attached. His stamp covers the states he is licensed in — tell us where you are building, and we will say what your soil, frost depth or seismic category adds.

Questions about this kit

Do I need a hillside?

It is built to be buried with one end open to grade, which a slope makes easy. On flat ground the root cellar, with its walk-down stair, is usually the better fit.

Is it waterproofed?

No — like the root cellar, it keeps its humidity, which is what food and wine want.

Can it be longer?

Yes. It grows 4 ft at a time; size it in the configurator.